商品详情

陕西品牌JDZC1-6|JDZC1-10|电压互感器

JDZC1-10|概述

·本型电压互感器是户内环氧树脂浇注半封闭式产品，适用于交流50Hz ，额定电压10kV及以下的电力系统中，不但可以作电压、电能测量而且为操作机构提供操作电源。

.This transformer is indoor type，it is semi-closed s位ucture with epoxy resin casted. It is designed for use of mea.surement ofvoltage ，electronic

energy and relay protection in the power system with rated frequency

JDZC1-10|结构特点 Characteristic of structure:

·本型互感器为环氧树脂半浇注全绝缘结构。铁芯采用优质冷轧硅钢片叠装而成。互感器绝缘主要由环氧树脂组成，体积小、重量轻，安装方便。一次绕组引出钱端子的标志为 A、B;  二次绕组引出线端子的标志为 a、b (或la lb;2a 2b) 均在浇注体上清晰注成。在夹件上的接地标志旁有接地螺栓，下部支架供安装使用，整体结构紧凑，使用方便。

.JDZC1-6，10 type voltage transformer is epoxy resin casted for semi-closed structure. The core adopts high grade steel piece. With smal1 size， light weight，smal1 space for instal1ation，Al1 windings are completely cast阜d in the epoxy resin，anti-impu1se and resist mechanism pressure. Keep windings without moisture. The down-lea.d terminal remark of the primary windings is A，B; the down-lead terminal remark ofthe secondary windings is a，b; these remarks are clearly casted tbe surface ofthe product.

JDZC1-10|技术参数 Technicai data

·产品标准: GB1207-2006；

·污秽筹组: II级;

·负荷功率因数: COS Φ=O.8（滞后 ） ;

·其它技术参参见官网参数www.jtzm.net

.Standard:GB1207-2006; ti-Pollution: II Class;

.Power factor ofload:COS (T 0.8 (lagging)

.Other technical parameters refer to the datum of table.

陕西品牌JDZC1-6|JDZC1-10|电压互感器