商品详情

       手推常温标线机是引进隔膜泵技术，采用氮气瓶在划线时适到稳压，所画标线顺真。本机适用范围广，城市道路标线，斑马线，虚线都可以划，机器操作原理简单，所用发动机为进口。另配6m加长管可喷画各种标志，如箭头，文字等。

技术参数：

1.引擎：原装日本本田5.5Hp四冲程空冷式汽油发动机。

2.底盘：坚固焊接框架，表面经镀铬(锌)或抗腐蚀喷涂处理，配置高速型进口轴承，保证整机更轻盈、更灵便。

3.胶轮：左右后轮为充气式耐压真空轮，轮直径为：φ350mm；前导向轮为特制耐磨天然改性橡胶轮，轮直径为：φ190mm。

4.前轮定向器：可锁定前轮定向装置，确保划线机沿直线定向或弯道转向自如。

5.导向杆：上、下、左、右可自由调整。

6.工作泵机：采用重庆长江涂装公司新型隔膜式高压无气泵机，该泵流量大，压力稳，运行可靠，适用常温标线涂料。最高压力为20mpa（工作压力为10-15mpa），单泵最大流量9L/min。

7.涂料罐(选配)：容量为50Kg。罐内装有过滤装置，进料口配有吸气型过滤器。

8.喷涂枪：配两把新型手动喷枪，备有硬边柱型反向去污喷嘴（17/25或20/25)现场排堵方便快捷。非弧线喷嘴保证标线准直。闸把式单双枪控制器保证单双枪变换自如。

9.适用涂料：使用于常温溶剂型道路标线涂料的喷涂。

10.喷涂宽度：80-450mm。

11.外形尺寸：1350 mm（长）×1000 mm（宽）×1070 mm（高）。

12.整机重量：135kg(不含料桶)。

Technical Parameter:

1. Engine: original Honda 5.5Hp 4-stroke air-cooled gasoline engines.
2. Chassis: rugged welded frame, the surface is chrome-plated (zinc) or has been anti-corrosion coating processed,and the chassis is configured with imported high-speed bearings to ensure the machine is more lightweight and more flexible.
3. Rubber Wheel: left wheel, right wheel and rear wheel are inflatable vacuum wheels which are pressure-proof. Wheel diameter: 350mm;

the front jockey wheel is natural rubber wheel that is of special wear-resistant modification.  Wheel diameter: 190mm.
4. Front directional device: You can lock the directional device of the front wheel to ensure that the road marking machine turn freely whether it is along a straight line or a curve turning .
5. Guide rod: it can be freely adjusted.
6. Pump: We adopt the new diaphragm-type high-pressure paint-free pump machines manufactured by Chongqing Yangtze River Application Co., the pump flow rate is high and the pressure is steady, and it is reliable. The machine is appliable for cold solvent road marking paint. The maximum pressure 20mpa (working pressure for the 10-15mpa), the maximum flow of a single pump is 9L/min.
7. Paint cans (optional): capacity :50Kg. Tank is equipped with a filtering device and the feed port is equipped with suction-type filters.
8. Spray gun:configured with two new manual spray guns and hard-edged cylindrical nozzle which is of the function of reverse decontamination (17/25 or 20/25) . Marking of non-arc nozzles are to ensure alignment. Brake controller is to insure the sigle cylinder and the double cylinder alternate freely